Hioki MR8870-20 PRO KIT

Hioki Memory HiCorders are high-speed waveform monitoring and recording devices that can simultaneously measure multiple quick-changing phenomena due to complete isolation between channels and from each channel to the ground. The MR8870 is a handheld data acquisition (DAQ) recorder built in with 2 analog channels and 2MW of memory, suitable for elevator maintenance, machine, motor and inverter fault analysis, testing and inspections.

• MR8870-20 Memory HiCorder
• New mode for recording RMS fluctuations in addition to instantaneous waveform mode
• Save values in real time to a CF card
• Record four channels at once by synchronizing two instruments with the bundled PC application
• Compact and easy to carry
• Easy, intuitive operation
• Fast, 1MS/s performance despite the compact size
• Built-in, compact-yet-sharp QVGA-TFT wide LCD
• Number of channels: 2 analog channels 4 logic channels (standard) Note: Isolated analog channels, isolated input and frame, logic has common GND
• Measurement ranges: 10 mV to 50 V/div (10 div full-scale), 12 ranges, Resolution: 1/100 of range
• Max. rated voltage: Between terminals: 400 VDC, Between terminal to earth: 300 VAC, DC CAT II
• Frequency characteristics: DC to 50 kHz (-3 dB)
• Time axis (Memory mode): 100 µs to 5 min/div, 20 ranges,at 100 points/div resolution, three steps of time-axis magnification from ×2 to ×10, and 9 steps of time-axis compression from ×1/2 to ×1/1,000
• Recording intervals (RMS mode): 1 ms to 1 min., 16 settings, sampling period: 200 μs (fixed) (for AC voltage/current, 1,000 RMS values/sec.), envelope mode always on. Note: Only the maximum value and minimum value for each recording interval are recorded.
• Measurement functions: Memory recorder (high speed recording), RMS recorder (50/60 Hz, DC only)
• Memory capacity: 12-bits × 2M-words/ch (1 word = 2 bytes)
• Removable storage: CF card TYPE I slot ×1 (Up to 2 GB)
• Display: 4.3-inch WQVGA-TFT color LCD (480 × 272 dots)
• Displayable languages: English, Japanese
• Interfaces: USB 2.0 mini-B receptacle ×1, Functionality: Connect the instrument to a PC to send files on the CF card to the PC. The instrument cannot be controlled from a PC.
• Printer: N/A
• Power supply:
  • AC Adapter Z1005: 100 to 240 VAC (50/60 Hz) , 30 VA max. (when using the AC adapter and charging the 9780 with the instrument)
  • Battery Pack 9780: 3 VA, continuous operating time of approx. 2 hr. (25°C reference value, when used with the Z1005, the Z1005 takes priority), charging time of 200 min. using the AC adapter (25°C reference value) (option)
  • External DC power: 10 to 16 V, 10 VA max. (connection cord of 3 m or less is available by special-order)

  >

• Dimensions and mass: 176 mm (6.93 in)W × 101 mm (3.98 in)H × 41 mm (1.61 in)D, 600 g (21.2 oz) (with the Battery pack 9780 installed)

>

Each Unit Includes

• 9782 Hard Carrying Case
• Rechargeable Battery Pack 9780
• 2ea. 9197 Connection Cord
• 9726 128 MB CFC
• AC Adapter
• PC Wave Processor Software
• USB Cable