No products in the cart.
- The minimum value holding function provides the easy detection of hole diameter
- Up to three sets of master value and upper/lower tolerance value can be memorized
- An analog bar indicator is integrated to enhance the intuition in reading
- GO/±NG judgment is performed by setting the upper and lower tolerances
- Up to four rods (250mm or 500mm) can be used
- Accuracy: Wide Range: 0.003mm / .00012â€
- Narrow Range: 0.002mm / .00008†Resolution: .00005 / 0.001mm
- Display: LCD
- Battery: SR44 (1 pc.) (938882)
- Battery life: Approx. 9 months for normal use
- Dust/Water protection level: Conforming to IP53
- Origin-set, Zero-Setting, Presetting, Power on/off, inch/mm conversion (inch/mm type only),
- Data output, GO/±NG tolerance judgment
- Alarm: Low battery voltage, scale contamination, over-flow error, tolerance limit setting error
- Range 1.8-4in 45-100mm
- Probe 6 in 152.4mm
