No products in the cart.
- Calibrate T/C instruments to 0.1 & 0.01 °F & °C
- Types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel): -13.000 to 80.000 mV
>
- Calibrate RTD instruments to 0.1 & 0.01 °F & °C
- Pt 10, 50, 100, 200, 500 & 1000 Ohm (3850)
- Pt 100 Ohm (alpha=3902, 3916, 3926)
- Cu 10 & 50 Ohm and Ni 120 Ohm
>
- Calibrate with Confidence
- Resolution to 0.01 °F Accurate to 0.2°C
- Cold Junction Sensor Accurate to 0.05°C
>
- Perform Heat Treating Surveys & Accuracy Tests
- Meets or exceeds the requirement of AMS 2750 as both a Secondary Standard Instrument and as a Field Test Instrument
>
- Troubleshoot RTD Sensors & Instruments
- Automatic detection of 2, 3 or 4 wire connections indicates when individual wire connections are open
- Verify proper instrument operation by measuring the excitation current
>
- Faster Calibrations
- Instantly select three outputs with EZ-CHECK switch
- Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping
>
- Easily Change T/C Types & Scale
- Double click to select T/C type & °F & °C
>
- Use in the Plant, Field or Shop
- Includes Rubber Boot and mV Test Leads
- Low profile switches resist accidental damage
- Brass screws for T/C wires plus mini T/C socket
>
- Easy-to-Read Display
- Turn on the backlight to read in dark areas of the plant
>
- Simple No Tool Battery Changes
- Four inexpensive AA batteries
>
- Verify Resistance, Cold Junction Temperature & Output
- Secondary Display of Resistance for RTDs and compensated millivolt setting and cold junction temperature for T/C
>
>
Each Unit Includes
- Four “AA” Alkaline batteries
- Certificate of Calibration Card
- Rubber Boot Part No. 020-0213
- Deluxe Hands Free Carrying Case Part No. 020-0211
- Evolution mA/V Test Leads Part No. 020-0207 1 Red & 1 Black Lead with Banana Plugs & Alligator Clips
- Evolution RTD Wire Kit Part No. 020-0208 2 Red & 2 Black Leads with Banana Plugs & Spade Lugs
